|
MicroGuard® HVAC/R protective treatments are designed for use on heating and air
conditioning equipment; coils, fins, tubes, fans and even oxidized
cabinets. These products can be installed on units before installation or
on previously installed field units with equal success.
MicroGuard® HVAC/R protective treatments retard corrosion on the non-ferrous
metal fins and tubes, thus, extending the life of the equipment
asset and helping to maintain good air flow efficiencies. This fact
has been substantiated by numerous salt chamber tests using ASTM
B-117. Coated aluminum fin stock was subjected to well in excess of
6,000 hours in the salt spray chamber and showed no consequential
degradation, due to corrosion.
In addition, the
cured film of MicroGuard® HVAC/R protective treatments will
not support mold growth. The completely inorganic nature of the
cured film presents no nutrient source for mold. Plus, the cured
film exhibits a slight positive charge, which acts as a natural
“repelling” action for mold spores, dirt and other organic debris,
so fins and coils are more easily cleaned, during normal service
maintenance cycles. This single important feature may be the most
significant variable for maintaining better indoor air quality.
Further, testing
by both independent third party sources and by numerous internal
studies has shown that HVAC/R Units coated with MicroGuard® protective treatments will operate more efficiently and can save up
to 15% or more in energy costs. Results can vary and periodic
cleaning of the coils & fins will contribute to maintaining the
efficient operation of the unit.
HVAC/R Coatings
MicroGuard® AD35 HVAC/R Coil & Fin Clear Protective Treatment
Surface Cleaners
& Conditioners
MicroKleen™
AD72-930 Final Rinse
MicroKleen™
PLC-1 Industrial Cleaner & Degreaser
MicroKleen™
AD1-919 Spray & Equipment Cleaner
HVAC Sell Sheet
USA Coating Center List
International HVAC Installer List
|
